Products

Reinforced with high-modulus carbon fiber or aramid tensile cords and optimized curvilinear tooth geometries, Kaihong high torque timing belts deliver massive torque capacity, zero backlash slip, quiet operation, and zero elongation maintenance. Available in H8M, 8MGT, H11M, H14M, and G14M pitch profiles. Contact our engineering team for roller chain conversion calculations, custom belt widths, and direct factory wholesale pricing.

Positioned between classical trapezoidal belts and high-cost GT profiles, Kaihong G-Type Timing Belts deliver 30%–50% higher torque capacity, whisper-quiet operation (58–65 dBA), and a service life exceeding 5,000 hours without lubrication. Constructed with a chloroprene rubber body (HNBR/PU optional), high-modulus fiberglass cord, and a Nylon 66 wear-resistant tooth canvas. Contact our technical team for custom cleated/grooved backings, drive sizing assistance, and factory-direct wholesale pricing.

Certified to ISO 9001:2015 and ISO 14001:2015, Kaihong manufactures high-precision synchronous drive solutions including the advanced s-type timing belt. Featuring an arc-transition root with a flat-topped crest profile (STS profile), our S-series belts deliver 30% higher power capacity, up to 99% transmission efficiency, and smaller backlash for tight servo positioning.

Engineered with a distinctive longitudinal crest notch for air venting, Kaihong this r-type timing belt eliminates "air explosion" meshing noise (56–65 dBA) while providing 15%–20% higher load capacity than STD series belts. Constructed with a weather-resistant rubber backing, high-modulus fiberglass cords (±0.02 mm pitch accuracy), and self-lubricating Nylon 66 tooth facing.

Representing a second-generation advancement over classical trapezoidal designs, Kaihong h-type timing belts feature fully rounded tooth crests and roots that distribute shear forces evenly across the tooth flank, boosting torque capacity by roughly 30%. Constructed with a weather-resistant chloroprene rubber body, helically wound zero-elongation fiberglass cords, and a Nylon 66 wear-resistant tooth canvas.

Certified to ISO 9001:2015 and ISO 14001:2015, Kaihong manufactures multi-axis power transmission components including the dual-action double-sided timing belt. Designed for serpentine paths, counter-rotating roller drives, and multi-shaft synchronization, these belts incorporate teeth on both top and bottom faces to replace secondary gearboxes and idler pulleys—saving over 30% in machinery footprint.